Reliable belt conveyor designed for the continuous transportation of sludge, screenings and solid materials from the collection hopper to the designated discharge point.
Sludge & Screenings Handling
The CH Belt Conveyor is designed for the continuous transportation of sludge, screenings and other solid materials generated during municipal and industrial wastewater treatment processes.
The equipment uses a PVC or rubber conveyor belt to move material in a straight direction from the receiving hopper to the designated discharge point. The conveyor can be supplied in an open, partially covered or enclosed arrangement according to site and operational requirements.
CH Belt Conveyors are designed for stable and smooth operation while maintaining simple operating requirements and low maintenance intensity.
The conveyor width, conveying speed, conveyor length, motor power, belt material and construction material can be selected according to the required handling capacity and project conditions.
Sludge and screenings collected during wastewater treatment must be transferred safely and continuously from the collection point to the next handling or disposal process.
The CH Belt Conveyor receives material from a hopper or upstream treatment equipment and transports it in a straight direction toward the designated discharge point.
A continuously moving PVC or rubber belt supports the material during transportation. The supporting frame, rollers, drive motor and gearbox maintain stable movement along the conveyor length.
Depending on the project requirements, the conveyor can be supplied with a stainless-steel cover, wash system, counterweight arrangement, selected belt material, customised conveying speed and project-specific material of construction.
Operating Process
Main Components
The CH Belt Conveyor is available in multiple belt widths and conveying speed configurations. The final capacity, conveyor length, motor power, belt material and construction arrangement are selected according to the material characteristics, required handling capacity and project conditions.
| Belt Width | Capacity at 0.2 m/s | Capacity at 0.4 m/s | Capacity at 0.8 m/s | Capacity at 1.6 m/s |
|---|---|---|---|---|
| 450 mm | 18.75 ton/hr | 37.5 ton/hr | 75 ton/hr | 150 ton/hr |
| 600 mm | 25 ton/hr | 50 ton/hr | 100 ton/hr | 200 ton/hr |
| 750 mm | 31.25 ton/hr | 62.5 ton/hr | 125 ton/hr | 250 ton/hr |
| 900 mm | 37.5 ton/hr | 75 ton/hr | 150 ton/hr | 300 ton/hr |
Motor Power Selection
Indicative motor power requirements vary according to the required conveying capacity and total conveyor length. Final motor selection is subject to project conditions and technical confirmation.
| Capacity | 10 m Length | 20 m Length | 30 m Length | 40 m Length |
|---|---|---|---|---|
| 25 tons/hr | 0.2 kW | 0.4 kW | 0.75 kW | 1.1 kW |
| 50 tons/hr | 0.75 kW | 1.5 kW | 2.2 kW | 3 kW |
| 100 tons/hr | 1.5 kW | 3 kW | 3.7 kW | 5.5 kW |
| 150 tons/hr | 2.2 kW | 3.7 kW | 5.5 kW | 7.5 kW |
| 200 tons/hr | 3 kW | 5.5 kW | 7.5 kW | 11 kW |
| 250 tons/hr | 3.7 kW | 7.5 kW | 11 kW | 15 kW |
| 300 tons/hr | 5.5 kW | 7.5 kW | 11 kW | 18.5 kW |
Key Features
Customisation Options
Applications
Only approved documents uploaded for this product are displayed. Empty document fields remain hidden.
TS Chuan provides local support for conveyor configuration, belt width selection, capacity coordination, conveyor length, motor power requirements, belt material selection, construction material, installation planning, maintenance and after-sales requirements in Malaysia.
The final conveyor configuration is selected according to the characteristics of the transported material, required handling capacity, available installation space and project operating conditions.
Share your flow requirement, application, site conditions and project objective for product and model guidance.
